BOSCH EWE-FCP500-IW--> 100--> AV-ресивер Harman/Kardon AVR 445

AV-ресивер Harman/Kardon AVR 445


Reviewed by:
Rating:
5
On 02.01.2019

Summary:

.

AV-ресивер Harman/Kardon AVR 445

AV-ресивер 7.1;мощность 80 Вт (на канал);HDMI-интерфейсы;подключение к компьютеру по USB;радиотюнер AM/FM


Обзор:

ЕЩЕ ОДИН УСИЛОК от HARMAN-KARDON!

Dec 29, 2013 · Harman/Kardon AVR 170, AV-ресивер 5.1, мощность: 100 Вт, C/Ш: 100 дБ, HDMI, тюнер AM/FM, DolbyDTS-HD High Resolution, DTS-HD Master.

Harman Kardon AVR 445 7.1 Channel 80 Watt Receiver for sale online | eBay


У меня harman / kardon 445. Недавно, менее месяца.

AV-ресивер Harman/Kardon AVR 445

Очень доволен во всех отношениях, в первую очередь - музыкальностью. Harman Kardon VR 2550, AVR 3550, AVR 4550, AVR 7500, AVR 8500, Инструкция товара.

404 Not Found


Усилители и ресиверы Harman/Kardon AVR 445 | Большой интернет-магазинов России в каталоге ТехноПортала. Покупайте усилители и ресиверы Harman/Kardon AVR по лучшей цене с отзывами.

AV-ресивер Harman/Kardon AVR 445


Перед покупкой Harman/Kardon AVRобязательно почитайте отзывы покупателей, ознакомьтесь.
Harman/Kardon 445 узнать цены и подробные характеристики.

Смотреть видео обзор, прочитать отзывы и обсудить на форуме.

AV-ресивер Harman/Kardon AVR 445


AV-ресивер Harman/Kardon AVR 445 — купить сегодня c доставкой гарантией по выгодной цене. AV-ресивер Harman/Kardon AVR 445: характеристики, фото, магазины на карте.
Https://luga-les.ru/100/ljo0109f-002-vobler-lucky-john-original-deep-john-90f-90-mm-002-12g.html 2007 5500 Y Harman Kardon AVR 255/254 2008 649 Y Harman Kardon AVR 2600 2009 699 Harman Kardon AVR 355/354 2008 899 Y Harman Kardon AVR 3550HD 2008 999 Y Harman Kardon AVR 3600 2009 999 Y Harman Kardon AVR 660 2008 Y Harman Kardon AVR 760/7550HD 2008 Y
Used Harman Kardon Av for sale on 300+ second hifi sites & shops.

AV-ресивер Harman/Kardon AVR 445

Harman AV 445 / Patos B 500 Finn. Harman/Kardon AVR 5550 AV-ресивер Hi-Fi.
Av-ресивер Harman/Kardon 435 - купить недорого на 1K.by. Полное с фотографиями, обзоры и отзывы от покупателей, цены в интернет-магазинах.

AV-ресивер Harman/Kardon AVR 445


Harman/Kardon AVR 1500, AVR 1550:. Harman/Kardon avr.

#59 - Harman Kardon AVR 235 receiver repair

Harman/Kardon avr 745. Harman/Kardon avr 355. AV ресивер это сердце и мозг.

AV-ресивер Harman/Kardon AVR 445

For models having a power cord with a polarized plug: CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Modèle pour les Canadien Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Please register your product on our Web site at www.
Typographical Conventions In order to help you use this manual with the remote control, front-panel controls and rear-panel connections, certain conventions have been used.
Whether the text appears in all uppercase or upperand lowercase characters, performance and operation remain the same.
Thank you for choosing Harman Kardon!
With the purchase of a Harman Kardon ® AVR 445, you are about to begin many years of listening enjoyment.
The AVR 445 has the most extensive range of audio and video processing, control and connectivity options ever offered by Harman Kardon, enabling it to provide the best possible audio and video reproduction with any type of source material.
This small investment of time will yield significant dividends in taking the maximum advantage of this new addition to your home theater system.
If you have any questions about this product, its installation or its operation, you may also access a wealth of information and assistance by visiting our Web site at www.
Description and Features The AVR 445 serves as the hub of your home entertainment system, providing a wide range of listening possibilities for almost any audio or video program source, whether it is the broadcast of a movie or sporting event in HDTV or a vintage mono or stereo recording.
When playing digital audio sources, the AVR 445 decodes Dolby ® Digital, Dolby Digital EX, DTS ® and DTS-ES ® data streams.
Two-channel stereo and matrix surround sources benefit from all current Dolby Pro Logic ® IIx modes and DTS Neo:6.
® The latest version of our proprietary Logic 7 ® process is on-board to create a wider, more enveloping sound увидеть больше and more defined surround channel positioning, regardless of the type of source material.
Additional audio playback options include a direct connection to compatible computer-based sources through a direct USB connection.
Along with two HDMI inputs and three 60MHz analog component video inputs, the AVR 445 converts composite and S-video to component for single video connections.
Thanks to a wide range of multizone options and a standard ZR 10 remote control, the AVR 445 makes it possible to watch and listen to a separate source in one room while the main home theater uses a different source.
Along with the latest advances in digital audio and video technology, Harman Kardon recognizes that some things remain constant, and in the case of the AVR 445 that is a requirement for audio power best served by our time-honored high-current, ultrawidebandwidth amplifier design.
Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit.
If you have any questions about the voltage requirements for your specific model, or about the line voltage in your area, contact your selling dealer before plugging the unit into a wall outlet.
Do Not Use Extension Cords To avoid safety hazards, use only the power cord attached to your unit.
We do not recommend that extension cords be used with this product.
As with all electrical devices, do not run power cords under rugs or carpets, or place heavy objects on them.
Damaged power cords should be replaced immediately by an authorized service center with a cord meeting factory specifications.
Handle the AC Power Cord Gently When disconnecting the power cord from an AC outlet, always pull the plug; never pull the cord.
If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet.
Do Not Open the Cabinet There are no user-serviceable components inside this product.
Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee.
If water or any metal object such as a paper clip, wire or a staple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service center.
CATV or Antenna Grounding If an outside antenna or cable system is connected to this product, be certain that it is grounded so as to provide some protection against voltage surges and static charges.
Installation Location Í To ensure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface.
When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.
Í Make certain that proper space is provided both above and below the unit for ventilation.
If this product will be installed in a cabinet or other enclosed area, make certain that there is sufficient air movement within the cabinet.
Under some circumstances, a fan may be required.
Í Do not place the unit directly on a carpeted surface.
Í Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating equipment.
Í Avoid moist or humid locations.
Í Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them.
Use caution when placing the unit on soft woods or other materials that may be damaged by heat or heavy objects.
Cleaning When the unit gets dirty, wipe it with a clean, soft, dry cloth.
If necessary, wipe it with a soft cloth with mild soapy water, then a fresh cloth with clean water.
Wipe dry immediately with a dry cloth.
NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent.
Do not use abrasive cleaners, as they may damage the finish of metal parts.
Avoid spraying insecticide near the unit.
Moving the Unit Before moving the unit, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet.
Important Information for the User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
The limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio-frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that harmful interference will not occur in a particular installation.
If this equipment does cause harmful interfer- ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Í Reorient or relocate the по этому сообщению antenna.
Í Increase the separation between the equipment and receiver.
Í Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: 1 this device may not cause harmful interference, and 2 this device must accept interference received, including interference that may cause undesired operation.
Unpacking The carton and shipping materials used to protect your new receiver during shipment were specially designed to cushion it from shock and vibration.
We suggest that you save the посетить страницу источник and packing materials for use in shipping if you move, or should the unit ever need repair.
To minimize the size of the carton in storage, you may wish to flatten it.
вот ссылка is done by carefully slitting the tape seams on the bottom and collapsing the carton.
Other cardboard inserts may be stored in the same manner.
Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.
If you do not wish to save the packaging materials, please note that the carton and other sections of the shipping protection are recyclable.
Please respect the environment and discard those materials at a local recycling center.
At this time, you should remove the protective plastic film from the front-panel lens.
Leaving the film in place will affect the performance of your remote control.
AVR 445 D ITAL https://luga-les.ru/100/modulyator-pbi-dch-5100tm.html />STEREO VID 12 D PRO LOGIC IIx VID 34 USB HEADPHONE X AM V UAL SPEAKER DIRECT HD TAPE DSP CD MI 6CH SURR.
OFF DVD 8CH A B C D E F G H I H J K L M N 1 2 3 4 5 6 7 8 9 NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at www.
To open the door, place the edge of a finger on the left or right edge of the panel and gently swing the door down toward you.
Note that the illumination surrounding the switch will turn blue when the unit is on, or in the Multiroom mode.
Each press of the button will select one of the surround mode categories.
For example, press this button to select Dolby modes, and then press the Surround Mode Selector 3to choose from the various mode options.
The specific modes will vary based on the number of speakers available, the surround mode category and whether the input source is digital or analog.
For example, press the Surround Mode Group Selector 2 to select a category such as Dolby or Logic 7, and then press this button to see the specific mode choices that are available.
For more information on mode selection, see pages 24, 35 and 58.
When an FM stereo station is tuned, the display will read AUTO ST TUNED.
See page 39 for more information on using the tuner.
When an XM Ready module is connected and activated, and when there is sufficient signal strength for the XM system to operate, pressing this button will also change the XM Radio channel.
Pressing it again will select the AM or FM frequency band, or XM Radio.
See page 39 for more information on the tuner.
See page 39 for more information on tuner programming.
See page 39 for more information on the tuner.
This button may also be used to switch between Stereo and Mono modes for Продолжение здесь radio reception.
Press and hold again to switch back to Stereo mode.
See pages 39 for more information on using the tuner.
See page 39 for more information on XM Radio operation.
Volume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume.
If the AVR 445 is muted, adjusting the volume control will automatically release the unit from the silenced condition.
Input Indicators: One of these indicators will light to identify the currently selected input.
Note that the entire list will light briefly each time the unit is turned on, as a test.
The left, center, right, right surround and left surround speaker indicators are composed of three boxes, while the subwoofer is indicated by one box.
When none of the boxes are lit for the center, surround or subwoofer channels, no speaker has been assigned that position.
The letters inside each box display the active input channels.
For standard analog inputs, only the L and R will light, indicating a stereo input.
For a digital source, the indicators will light to display the channels being received at the digital input.
When the letters flash, the digital input has been interrupted.
See page 38 for more information on the Channel Indicators.
In normal operation, this line will show the current input source and identify whether an analog or digital input is in use.
When the tuner is selected as the input, this line will identify the station as AM or FM and show the frequency and preset number, if any.
In normal operation, the current surround mode will appear on this line.
When an XM Ready module is connected and activated, and when there is sufficient signal strength for the XM system to operate, a variety of messages and information, including the XM channel title name, the current artist and track title, the XM Radio channel category and, when available, local traffic and weather information, will appear here.
Depending on the specific combination of input sources and surround mode selected, more than one indicator may light.
See page 36 for more information.
Aim the remote control at this area, and do not block or cover it unless an external remote sensor is installed.
FRONT-PANEL CONTROLS A B C D E F G H I H J K L M N The following controls and jacks are located behind the front-panel door.
To больше на странице the door, place the edge of a finger on the left or right edge of the panel and gently swing the door down toward you.
A Main Power Switch: Press this switch to apply power to the AVR 445.
This button MUST be pressed in to operate the unit.
When the jack is in use, the main room speakers will automatically be turned off and the unit will output a standard stereo signal.
You may also use the Dolby Headphone mode for an enhanced listening experience.
See page 35 for more information on the tone controls.
D Speaker Selector Button: Press this button to begin the process of manually configuring the AVR 445 for the type of speakers it is being used with.
For complete information on configuring the speaker settings, see page 29.
EChannel Adjust Selector: Press the button to begin the process of manually adjusting the channel level outputs using the source currently playing through your AVR.
For complete information on adjusting the channel output level, see page 41.
FDigital Input Selector: Press this button to begin the process of selecting a digital source for use with the currently selected input.
See page 35 for more information on digital audio.
GDelay Adjust Selector: Press this button to begin the process of adjusting the delay settings.
See page 30 for more information on delay adjustments.
The microphone does not need to be plugged in at other times.
K Optical 4 Digital Input: Connect the optical digital output of an audio or video product to this jack.
LCoaxial 4 Digital Input: Connect the coaxial digital output of a digital audio product such as a portable audio player or video game to this jack.
When these jacks are configured for use as outputs, the indicator will turn red to show that the jack may be used as an output for recording.
See pages 22 and 40 for more information on configuring the frontpanel jacks as outputs, rather than inputs.
See pages 22 and 40 for more information on switching these jacks between inputs and outputs.
NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at www.
If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input.
See page 19 for more information on A-BUS.
In conformance with the CEA color-code specification, the blue terminal is the positive + terminal that should be connected to the red + terminal on the Surround Left правы.

PROBAT 222 LYO 10 DCU (на 50 - 100 л) считаю with older color-coding, while the gray terminal should be connected to the red + terminal on the Surround Right speaker with the older color-coding.
See page 17 for more information on speaker polarity.
When making speaker connections, always make certain to maintain correct polarity by connecting the color-coded white for front left and red for front right + terminals on the AVR 445 to the red + terminals on the speakers and the black — terminals on the AVR 445 to the black — terminals ссылка на подробности the speakers.
See page 17 for more information on speaker polarity.
See page 39 for more information.
To ensure proper operation of the unit and to avoid possible damage to delicate surfaces, make certain that these holes are not blocked and that there is at least 3 inches of open space between the vent holes and any wooden or fabric surface.
It is normal for the fan to remain ссылка на подробности at most normal volume levels.
An automatic temperature sensor turns the fan on only when it is needed.
If you are in doubt as to which of the IR Output jacks to use, we recommend that you consult with your dealer or installer, or check with the manufacturer of the external Зеркало декоративное you wish to control.
D Center Channel Speaker Outputs: Connect these outputs to the matching + and — terminals on your center channel speaker.
In conformance with the CEA color-code specification, the green terminal is the positive + terminal that should be connected to the red + terminal on speakers with the older color-cod- ing.
Connect the black — terminal on the AVR to the black negative — terminal on your speaker.
https://luga-les.ru/100/licota-awt-jrd100f-klyuch-nakidnoy-usilenniy-100-mm.html page 17 for more information on speaker polarity.
However, they may also be used to power the speakers in a second zone, which will receive the output selected for a multiroom system.
To change the output fed to these terminals from the default of the Surround Back speakers to the Multiroom Output, you must change a setting in the Multiroom menu of the OSD system.
See page 44 for more information on configuring this speaker output.
In normal surround system use, the brown and black terminals are the surround back left channel positive + and negative — connections and the tan and black terminals are the surround back right positive + and negative — terminals.
For multiroom use, connect the brown and black SBL terminals to the red and black connections on the left remote zone speaker and connect the tan and black SBR terminals to the red and black terminals on the right remote zone speaker.
Connect the output of the sensor to this jack.
IMPORTANT NOTE: The power consumption of any device connected to the accessory outlet should not exceed 100 watts.
Never connect high-power devices such as amplifiers or video displays to the accessory outlet.
When this connection is used, the AVR 445 will automatically send a low-voltage signal to the connected device that turns it on when the AVR 445 is on, and off when the AVR 445 is placed in the Standby mode.
The connected component must respond to a 6-volt presence as the control signal.
IAC Power Cord Socket: Connect the AC power cord here when the installation is complete.
To ensure safe operation, use only the power cord supplied with the unit.
If a replacement is required, it must be of the same type and capacity.
J RS-232 Port: This jack may be used to control the AVR 445 over a bidirectional RS-232 serial control link to a compatible computer or programmable remote control system.
Due to the complexity of programming RS-232 commands, we strongly recommend that connections to this port for control purposes be made by a trained and qualified technician or installer.
K HDMI Output: Connect this jack to the HDMI input on a compatible HDMI-equipped video display.
L HDMI Inputs: Connect the HDMI output of video sources such as a DVD player, set-top box or HDTV tuner to either of these jacks.
M Component Video Monitor Outputs: Connect these outputs to the component video inputs of a video display.
See page 23 for more information on configuring the component video inputs.
Q DVD Video Inputs: Connect the composite or S-video outputs of a DVD player or other video source to these jacks.
See page 39 for more посмотреть больше />This connection is also used to connect a compatible computer to the AVR for system upgrades, when available.
See page 37 for more information on playback of computer audio with the AVR.
Instructions for upgrades will accompany the upgrade file download package.
The signal may be a Dolby Digital signal, DTS signal or a standard PCM digital source.
Do not connect the RF digital output of an LD player to these jacks.
The signal may be a Dolby Digital signal, a DTS signal or a standard PCM digital source.
If an external AM antenna is used, make connections to the AM and GND terminals in accordance with the instructions supplied with the antenna.
Most buttons have additional functions when used with other devices.
When a button is pressed, the function name will appear in the bottom line of the LCD Information Display c.
Do not remove the plug provided or connect any device to the jack.
Before using the remote, it is important to remember to press the Input Selector Button 3that corresponds to the unit you wish to operate.
The remote is also capable of operating a wide variety of other products using the control codes that are part of the remote.
Before using the remote with other products, follow the instructions on pages 46—49 to program the proper codes for the products in your system.
It is also important to remember that many of the buttons on the remote take on different functions, depending on the product selected using the Input Selectors d.
The descriptions shown here primarily detail the functions of the remote when it is used to operate the AVR 445.
Note that this will turn off the main room functions, but if the Multiroom system is activated, it will continue to function.
First, if the AVR 445 is not turned on, this will power up the unit.
Next, it will select the source shown on the button as the input to the AVR 445.
Finally, it will change the remote control so that it controls the device selected.
A second press of this button selects the component connected to the CD inputs.
A second press of this button selects the device connected to the Tape inputs.
A second press selects the source connected to the USB jack as the input.
A second press selects the device connected to the HDMI 2 jack.
In normal operation, the remote will revert to controlling the AVR when no button is pressed for 6 seconds.
This allows the remote to automatically return to control of important functions such as volume, mute and surround mode selection after you have used the remote to control another device.
If you wish to change the length of time that the remote operates another device, or to have the remote remain active for control of the other device such as a DVD player or set-top box until you manually return control to the AVR by pressing the AVR Selector 4, follow the instructions on page 55.
If the AVR 445 is in the Standby mode, it will also turn the AVR 445 on.
See page 31 for more information on manually calibrating the AVR 445.
Each press of the button selects another mode.
See page 58 for more information on surround modes.
See page 58 for available Logic 7 options.
After pressing the button, simply press the proper Numeric Keys cto select a station.
See page 39 for more information on the tuner.
When using the remote to enter frequencies for direct tuner access, press this button to clear previous entries.
BTuning Mode Button: When using listening to AM or FM stations, press this button to change the tuner mode between manual and automatic.
When the FM band is in use, pressing the button so that the MANUAL mode is activated will enable you to tune stations with weak signals by changing to monaural reception.
When listing to XM Radio, press this button to scroll through the following display options for the Lower Display Line D: Channel Name Channel Category Artist Title.
See pages 39—40 for more information on XM Radio operation.
See page 41 for more information.
D Navigation Button: This disc-like button is used to navigate through the on-screen configuration menus, to scroll through option lists and to select choices for the various settings such as delay, speakers, surround modes, digital inputs, etc.
Depending on the specific task, pressing the button will either change the menu or a configuration choice, or change the option shown in the onscreen or front-panel display.
E Digital Select Button: Press this button to assign one of the digital inputs ab KLto a source.
It is also used in the setup procedures for delay time, speaker configuration and channel output level adjustment.
GTransport Play Buttons: These buttons have no direct function on the AVR 445, but they are used when the remote is programmed for a compatible DVD, CD or tape player.
Pressing these buttons will transmit a forwardor reverse-play command, according to the capabilities of the player being controlled.
In the factory default setting, these buttons are programmed for Harman Kardon DVD players so that you may control a compatible player without having to switch devices.
To lower the volume, press the button marked ¤ by pressing toward the bottom of the remote.
Pressing these buttons will transmit a fast-play forward, fast-play reverse, or fastforward or -reverse scan command, according to the capabilities of the player being controlled.
In the factory default setting, these buttons are preprogrammed with the remote codes for Harman Kardon DVD players so that you may control a compatible player without having to switch devices.
JMain Transport Controls: These buttons have no direct function on the AVR 445, but they are used when the remote is programmed for a compatible DVD, CD or tape player.
Pressing these buttons will transmit a stop Írecord Îor pause ± command, according to the capabilities of the player being controlled.
In the factory default setting, these buttons are programmed with the remote codes for Harman Kardon DVD players so that you may control a compatible player without having to switch devices.
In the factory default setting, these buttons are programmed with the remote codes for Harman Kardon DVD players so that you may control a compatible player without having to switch devices.
NOTE: When the AVR 445 is used with The Bridge optional and your iPod, some of the buttons that are used to control the various transport functions on source devices are used to control the iPod, and navigate through its menus and content.
When an FM Stereo station is tuned, the display will read AUTO ST TUNED.
See page 39 Автомобильный сабвуфер CWA-10F01 more information on using the tuner.
NDisc Skip Button: This button has no direct function for the AVR 445 but may be used to change the disc in a CD or DVD changer when the remote is programmed for that type of device.
OProgram Button: This button is used to begin the process of programming the remote.
Press and hold this button for 3 seconds to place the remote in the programming mode.
Once the red LED under the Set Button plights, release the button.
You may then select from the desired option.
See pages 46—56 for more information on configuring the remote.
QMultiroom Button: Press this button to begin the process of activating the multiroom system or to change the input or volume level for the second zone.
See page 44 for additional information on the multiroom system.
See page 49 for more information on macros.
SSleep Button: Press this button to place the unit in the Sleep mode.
After the time shown in the display, the AVR 445 will automatically go into the Standby mode.
Each press of the button changes the time until turn-off in the following order: When the Sleep timer is in use, the front-panel display indicators will dim to half-brightness.
TNight Mode Button: Press this button to activate the Night mode.
The Night mode is available in specially encoded Dolby Digital sources, and it preserves dialogue center channel intelligibility at low volume levels.
See page 35 for more information on the tone controls.
WDim Button: Press this button to activate the Dimmer function, which reduces the brightness of the front-panel display, or turns it off entirely.
Press the button once to change the display to reduce the brightness by 50%, press it again within 5 seconds and the main display will go completely dark.
Note that this setting is temporary; regardless of any changes, the display will always return to full-bright- ness when the AVR is turned on.
The blue accent lighting inside the volume control will also remain at full-brightness when the panel is at 50%, but go out when the panel lights are fully dimmed.
The first press will call up the last-used station or XM channel.
Subsequent presses will select the last-used FM, AM and XM Radio station or channel.
See pages 46—56 for more information on programming the remote.
This enables you to compensate for the loss of lip sync that may be caused by digital video processing in your display or by television stations.
See page 30 for more information on delay options.
Press the Set Button p and then select another channel to configure.
When all adjustments have been completed, press the Set Button p twice to exit the settings and return to normal operation.
See page 28 for more information on manual speaker setup.
First, tune the desired station, and then press this button.
See page 39 for more information on the tuner, and see page 40 for information on storing XM channel numbers in the preset memory.
They are also used to select channel numbers when TV, Cable or SAT has been selected on the remote, or to select track numbers on a CD, DVD or LD player, depending on how the remote has been programmed.
These buttons are also used to enter letters and numbers when renaming devices in the LCD Information Display.
See page 53 for more information on renaming devices and keys.
Depending on whether your system is configured for 5.
See page 58 for more information on stereo playback modes.
See page 58 for the available Блок излучения БИК1 Neo:6 options.
When a DTS source is not in use, this button has no function.
See page 58 for the available DTS digital options.
Each press of this button selects a Dolby Pro Logic II, Dolby Pro Logic IIx or Dolby Virtual Speaker mode, as available for the number of speakers in your system.
When a Dolby Digital-encoded source is in use, the Dolby Digital mode may also be selected.
See page 58 for the available Dolby surround mode options.
Be certain that the lens is not covered when using the remote, and point the lens toward the AVR for best results.
In learning mode, the remote receives IR codes to be learned through a sensor behind the lens.
NOTE: DO NOT remove the rubber plug that covers the jack on the upper right side of the remote.
The jack is not active and is reserved for future use.
When it is used in the same room as the AVR 445, it will control the functions of the AVR 445 or any compatible Harman Kardon products in that room.
When it is used in a separate room via a sensor connected to the Multiroom IR Input Jack e, the buttons for Power, Input Source, Volume and Mute will control the source and volume for the second zone, as connected to the Multiroom Audio Output Jacks ª.
See page 44 for complete information on using the Multiroom system.
When it is used in a remote room with a sensor that is connected to the Multiroom IR Input Jack e, this button turns the Multiroom system on and off.
The input in use when the unit was last on will be selected.
When the unit is already in use, pressing one of these buttons will change the input.
©Navigation Controls: Depending on the menu or function in use, pressing these buttons will navigate through menus, scroll through option lists or configuration choices, or move the cursor position.
Press the left, right, up or down button, as appropriate to the adjustment being made.
When it is used in a remote room with a sensor that is connected to the Multiroom IR Input Jack e, this button will raise or lower the volume in the remote room.
These buttons may also be used for numeric entries when appropriate with other compatible sources.
Blank Buttons: These buttons are not active.
Pressing them will not change or control any function on the AVR 445 or other IR devices.
¬Clear Button: When programming the tuner memory, press this button to clear the current entry.
After pressing this button, press the appropriate Numeric Keys.
First, tune to, or select, the desired station or channel, and then press this button.
Within five seconds, while you see the station or channel flash in the Upper Display Line C and in the on-screen display, press the Numeric Keys for the preset number between 01 and 30 that you wish to assign to the station or channel.
See page 39 for more information.
When the FM band is in use, pressing the button so that the MANUAL mode is activated will enable you to tune stations with weak signals by changing to monaural reception.
When listing to XM Radio, press this button to scroll through the following display options for the Lower Display Line D: Channel Name Channel Category Artist Title.
See pages 39—40 for more information on XM Radio operation.
See page 39, and the manuals for The Bridge and your iPod for more information.
ßMute Button: When the ZR 10 remote is used in the room where the AVR 445 is located, press this button to temporarily silence the unit.
When it is used in a remote room with a sensor that is connected to the Multiroom IR Input Jack e, this button will temporarily silence the feed to the remote room only.
Press the button again to return to the previous volume level.
To ensure proper operation, do not block this area when holding the remote.
System Installation After unpacking the unit, locating it in a place with adequate ventilation and placing it on a solid surface capable of supporting its weight, you will need to make the connections to your audio and video equipment.
IMPORTANT NOTE: For your personal safety and to avoid possible damage to your equipment and speakers, it is always good practice to turn off and unplug the AVR and ALL source equipment from the AC output before making any audio or video system connections.
Audio Equipment Connections We recommend that you use high-quality interconnect cables when making connections to source equipment and recorders to preserve the integrity of the signals.
Connect the analog output of a CD player to the CD Audio Inputs 6.
NOTE: If your CD player has both fixed and variable audio outputs, it is best to use the fixed output unless you find that the input to the receiver is so low that the sound is noisy, or so high that it is distorted.
Connect the output of a digital source such as a CD or DVD changer or player, a video game, a digital satellite receiver, an HDTV tuner or digital cable set-top box or the output of a compatible computer sound card to the Optical and Coaxial Digital Audio Inputs ab KL.
Connect the coaxial or optical Digital Audio Outputs XYon the rear panel of the AVR 445 to the matching digital input connections on a CD-R, MiniDisc or other digital recorder.
Assemble the AM loop antenna supplied with the unit so that the tabs at the bottom of the antenna loop snap into the holes in the base.
Connect it to the AM Antenna Connections i.
Connect the supplied FM antenna to the FM Antenna Jack h.
The FM antenna may be an external roof antenna, an inside powered or wire-lead antenna or a connection from a cable TV system.
If the antenna or connection uses 300-ohm twin-lead cable, you must use an optional 300-ohm-to-75-ohm adapter to make the connection.
Connect the front, center, surround and surround back speaker outputs 57DE to the respective speakers.
To ensure that all the audio signals are carried to your speakers without loss of clarity or resolution, we suggest that you use high-quality speaker cable.
Many brands of cable are available and the choice of cable may be influenced by the distance between your speakers and the receiver, the type of speakers you use, personal preferences and other factors.
Your dealer or installer is a valuable resource to consult in selecting the proper cable.
Regardless of the brand of cable selected, we recommend that you use cable with a по этому адресу of 14 or smaller.
Remember that when specifying cable, the lower the number, the thicker the cable.
Cable with a gauge of 16 may be used for short runs of less than 10 feet.
We do not recommend that you по этой ссылке cables with an AWG equivalent of 18 or higher, due to the power loss and degradation in performance that will occur.
Cables that are run inside walls should have the appropriate markings to indicate listing with UL, CSA or other appropriate testing agency standards.
When connecting wires to the speakers, be certain to observe proper polarity.
Note that the positive + terminal of each speaker connection has a specific color code, as noted on page 8.
However, most speakers still use a red нажмите для деталей for the positive + connection.
NOTE: While most speaker manufacturers adhere to an industry convention of using black terminals for negative and red ones for positive, some may vary from this configuration.
We also recommend that the length of cable used to connect speaker pairs be identical.
For example, use the same length piece of cable to connect the front-left and front-right or surround-left and sur- round-right speakers, even if the speakers are a different distance from the AVR 445.
Connections to a subwoofer are normally made via a line-level audio connection from the Subwoofer Output 1 to the line-level input of a subwoofer with a built-in amplifier.
When a passive subwoofer is used, the connection first goes to a power amplifier, which will be connected to one or more subwoofer speakers.
If you are using a powered subwoofer that does not have line-level input connections, follow the instructions furnished with the speaker for connection information.
If an external audio source such as a DVD-Audio, SACD or high-definition optical disc player with 5.
Analog Video Equipment Connections Analog video components are connected in the same manner as audio components.
Again, the use of highquality interconnect cables is recommended to preserve signal quality.
If the device has a digital audio output, connect it to one of the Coaxial a or Optical b digital audio inputs.
Connect the analog audio outputs from the source to the matching Video 2 Audio Inputs e or Video 3 Audio Inputs f.
If the device has a digital audio output, connect it to one of the Coaxial a or Optical b digital audio inputs.
Only one connection type is required.
The default audio connection for a conventional DVD player is to link the coaxial digital audio output on the DVD player to the Coaxial 1 Digital Audio Input a, but you may also make a connection to either the Coaxial a or Optical b digital inputs, or to the Analog DVD Audio Inputs Z.
If the source has digital audio outputs, connect them to the Optical 4 Digital Input K or the Coaxial 4 Digital Input L.
This will help simplify the configuration process.
See page 22 for more information on the Auto-Poll feature.
This dual connection is not required for sources such as DVD players or video games that always output a digital stream.
Only one connection is needed, and S-video is the higher quality signal.
HDMI is a digital connection, eliminating the need to convert signals back and forth from digital to analog.
Some source or display components in your system may use DVI Digital Video Interface for digital video connections.
DVI carries the same digital video signals as HDMI but uses a larger connector and does not transport audio or control signals.
In most cases, you may mix and match DVI and HDMI digital video connections by using optional connector adapters.
Note, however, that some DVI-equipped video displays are not compatible with the HDCP copy protection coding that is increasingly carried with signals connected via HDMI.
If you have an HDMI source and a DVIequipped display, you may occasionally be unable to view a program if the display does not include HDCP.
This is not the fault of the AVR or your source; it simply indicates that the video display is not compatible.
This preserves the digital signal in its original form by passing it directly through from source to display.
However, this also means that the AVR does not have access to the signal and thus it is not able to add menus or on-screen messages to HDMI signals, or to process the audio that may be part of the signal in an HDMI connection.
The default connections are Optical 3 b for a source connected to HDMI 1 L and Coaxial 3 a for a source connected to HDMI 2 L.
This is needed to view both the setup menus and on-screen messages, and to view other non-HDMI video sources.
The AVR 445 does not convert analog video signals to HDMI.
System and Power Connections The AVR 445 is designed for flexible use with multiroom systems, external control components and power amplifiers.
Main Room Remote Control Extension If the receiver is placed behind a solid or smokedglass cabinet door, the obstruction may prevent the remote sensor from receiving commands.
In this event, an optional remote sensor may be used.
If other components are also ссылка на подробности from receiving remote commands, only one sensor is needed.
This enables the remote room location to control source equipment functions.
Connect the IR OUT jack of one unit to the IR IN of the next to establish this chain.
Multiroom Audio Connections The AVR 445 is equipped with multizone capabilities that allow it to send a separate audio source to the remote zone from the one selected for use in the main room.
In the remote room, connect the interconnect cable to a stereo power amplifier.
Option 2: Connect the Multiroom Audio Outputs 8 on the AVR 445 to the inputs of an optional stereo power amplifier.
Run high-quality speaker wire from the amplifier to the speakers in the remote room.
When using this option, you will not be able to use the full 7.
Before using the remote room, you will need to configure the amplifiers for surround operation by changing a setting in the MULTIROOM menu, following the instructions shown on page 44.
NOTE: For all options, you may connect an optional IR sensor in the remote room to the AVR 445 via an appropriate cable.
You may install an optional volume control between the output of the amplifiers and the speakers in options 1 and 2.
When used with an optional A-BUS product, you have all the benefits of remote zone operation without the need for an external power amplifier.
To use the AVR 445 with an approved A-BUS product, simply connect it to the AVR 445 using standard Category 5 wiring that is properly rated for the specific in-wall installation.
Terminate the wiring at the receiver end to a standard RJ-45 connector in compliance with the instructions furnished with the A-BUS product.
No further installation or adjustment is needed, as the A-BUS jack on the AVR 445 routes the signals to their proper destination for power, signal source and control.
RS-232 Connections The AVR 445 is equipped with an RS-232 Serial Connection Port a that may be connected to a compatible, optional, external computer, keypad or control system for bidirectional communications that enable the external system to control the AVR, and for the AVR to report status and handshake data back to the controller.
Use of the RS-232 port for this type of control requires specific technical knowledge, and we recommend that any connection and programming for control be made by a trained installer or technician familiar with the equipment being used.
DO NOT connect it to other devices such as portable audio players, card readers, USB memory storage devices, external hard drives, USB accessories, digital cameras or cellular phones.
It may not be used for other purposes, such as system control, video or still-image playback.
Trigger Connection The AVR 445 is equipped with a low-voltage trigger that may be used to control a wide variety of compatible, optional devices that respond to voltage actuation commands.
This includes external audio power amplifiers, video screens, motorized blinds and other compatible products in a home theater or automation system.
Due to the complexity of interfacing with powercontrolled devices, we strongly recommend that they be installed by a qualified professional.
The Trigger Output H delivers 6 volts DC when activated, and removes the voltage when the AVR is turned off.
The connection is a 3.
The Trigger Output His for use with devices such as power amplifiers that you wish to activate whenever the AVR is turned on, regardless of the input selected.
After checking for voltage, current and polarity compatibility between the device being controlled and the AVR, simply connect one end of the trigger cable to the device being controlled and the other end to the Trigger Output H on the AVR.
IMPORTANT NOTE ON THE TRIGGER CONNECTION: The current draw from the trigger jack cannot exceed 1.
XM Radio Connections XM Radio is a satellite-delivered, subscription-based, programming service that provides a wide range of music, sports, news and information programming with digital audio quality.
To purchase an XM antenna module, consult your dealer, or contact XM Radio at www.
After following the instructions packed with the module, place the XM antenna near a south-facing window and run the cable to the AVR.
Connect the plug at the end of the cable to the XM Ready Input V.
Once the connection is made, follow the instructions on page 39 for more information on listening to XM Radio.
It is not available in Alaska or Hawaii.
Depending on your installation and location, XM service may not be available in some areas.
AC Power Connections This unit is equipped with an accessory AC outlet that may be used to power accessory devices, but it should not be used with high-current draw equipment such as power amplifiers.
The total power draw may not exceed 100 watts.
NOTE: Many audio and video products go into a Standby mode when they are used with switched outlets.
This type of product may not operate properly when used with the switched outlet.
The AVR 445 features a removable power cord that allows wires to be run in advance to a complex installation so that the unit itself need not be installed until it is ready for connection.
When all needed connections have been made, connect the AC power cord to the AC Power Cord Jack ·.
The AVR 445 draws significantly more current than other household devices, such as computers, that use removable power cords.
For that reason, it is important that only the cord supplied with the unit or a direct replacement of identical capacity be used.
When all audio, video and system connections have been made, the final steps before listening to your new AVR are to make the configuration adjustments that tailor the unit to the other components in your system, as well as accommodate your personal listening preferences.
A few minutes spent to correctly calibrate and configure your system will greatly add to your listening pleasure.
Speaker Selection and Placement While the most seamless surround sound reproduction comes from the use of speakers with identical or carefully matched driver elements at each position, no matter which brand or type of speakers you prefer, it is always best to use the same model or series for the left front, center and right front speakers.
Similarly, it is also desirable to use the same model or series for the surround speakers.
This ensures that the soundstage will be relatively seamless when a sound moves from one side of the room to the other.
Speaker Placement Once you have selected your speakers, it is important that they be placed in positions that enable them to do the best job of reproducing the sound as it was meant to be heard, regardless of the program content.
The placement of speakers can have a noticeable impact on the accuracy of the surround process, particularly in multichannel systems.
Depending on the number of speakers in your system, there is a recommended placement along the circle for each speaker, though the specific construction of your room, taking into account the available walls, bookcases, or floor space at which the speakers may be placed will obviously have some impact on where the speakers are ultimately located.
As a general rule, try to place all speakers so that they are positioned at the same height as your ears when you are seated at the prime listening position.
Use the following suggestions as a guide, and make the changes needed to fit the speakers to your room.
The distance between them should be about the same as the distance from the center channel speaker to the prime listening position.
Surround Speakers for 5.
Although many believe that these speakers should be placed at the rear of the room, the preferred position for them is at the sides of the room, with rear placement a second option when room conditions prevent the use of sidemounted surround speakers.
This translates to placing them to the side and slightly behind your preferred listening position.
V Center Speaker Front Left Front Right Speaker Speaker 30° 30° 110° 110° 1 1 Side Surround Side Surround Left Speaker Right Speaker Alternate placement Alternate placement for Side Surround for Side Surround Left Speaker Right Speaker 5.
Another way to spot the optimal, alternate rear-wall mounting position is to place the left surround speaker on the back wall so that it points directly at the front right speaker, and to have the right surround speaker point directly at the front left speaker.
If possible, aim the surround speakers so Измельчитель бойлов Korda Krusha Small 100 KKS100 БС they point inward, toward the listening area, rather than perpendicular to the walls.
Surround Speakers for 6.
We do not recommend this configuration, as it will not deliver a full surround sound field when any 7.
Video Screen Center Speaker Front Left Front Right Speaker Speaker 30° 30° 110° 110° Side Surround Side Surround Left Speaker Right Speaker Back Surround Speaker 6.
We recommend that you consider adding a second surround back speaker for a full 7.
Surround Speakers for 7.
A good way to visualize proper surround speaker positioning for 7.
The two speakers should ideally face https://luga-les.ru/100/obektiv-panasonic-12-35mm-f28-ii-asph-ois-lumix-g-x-vario-h-hsa12035.html each other.
The easiest way to visualize the placement of these speakers is to place the surround back left speaker directly opposite the right front speaker and to place the surround back left speaker directly opposite the left front speaker.
Center Video Speaker Screen Ссылка на страницу Left Front Right Speaker Speaker 30° 30° 90° 90° 1 150° Side Surround Side Surround Left Speaker Right Speaker Surround Back Surround Left Speaker Right Speaker 7.
Actual placement should be based on room size and shape and the type of subwoofer used.
One method of finding the optimal location for a subwoofer is to begin by placing it in the front of the room, about six inches from a wall, or near the front corner of the room.
Another method is to temporarily place the subwoofer at your normal listening position, and then walk around the room until you find a spot where the subwoofer sounds best.
Place the subwoofer in that spot.
For more information on subwoofer placement, as well as a variety of topics relating to audio and home theater, visit the Technology section of our Web site at www.
Links are provided there to informative white papers written by the acoustic and electronics experts at Harman Kardon and at our parent company, Harman International Industries, Inc.
NOTES ON SPEAKER PLACEMENT: 1.
The limitations of your listening room, including the placement of walls and furniture, may make it difficult to follow the speaker placement suggestions shown above.
For example, try not to have the right surround speaker further back into the room than the left surround speaker.
When using ceiling-mounted in-wall speakers, follow the same guidelines shown for conventional floorstanding or shelf-mounted speakers.
This will not only save you time; it will ensure that your room is calibrated and equalized with an accuracy not possible when these settings are made manually.
You are now ready to power up the AVR 445 to begin these final adjustments.
Make certain that the AC power cord is firmly inserted into the AC Power Cord Socket I and plug the cord into an unswitched AC outlet.
Carefully remove the protective plastic film from the front-panel lens.
If left in place, the film will prevent proper operation of the remote control.
Install the four supplied AAA batteries in the main remote as shown.
Be certain to follow the + and — polarity indicators that are in the battery compartment.
The ZR10 remote requires two Https://luga-les.ru/100/shine-ring-avtomobil-sr836.html batteries.
These easy-to-read displays give you a clear picture of the current status of the unit and make it easy to see which speaker, delay, input or digital selection you are making.
To view the on-screen menus, make certain that you have made a video connection to the appropriate matching input of your TV or projector.
On-screen menus may be viewed through component, S-video or composite video connections, but they are not available условия ТУ 16К80-09-90 an HDMI source is selected as the input or through the HDMI Output K.
IMPORTANT NOTE: When viewing the on-screen menus using a CRT-based projector, plasma display or direct-view CRT monitor or television, it is important that they not be left on for an extended period of time.
This will place an easily viewed list of the available options on the screen.
When this button is pressed, the Узнать больше MENU Figure 1 will appear, and adjustments are made from the individual menus.
Semi-OSD messages are available only when a 480i input source is being viewed.
They are not available when a 480p, 720p or 1080i source or an HDMI input is selected.
The time-out may be increased to as much as 50 seconds by going to the ADVANCED menu, and changing the item titled FULL OSD TIME OUT.
When the full-OSD menu system is used, OSD ON will appear in the Upper Display Line to remind you that a video display must be used.
When the semi-OSD system is used in conjunction with the discrete configuration buttons, the onscreen display will show two lines of text with the current menu selection.
Setting the System Configuration Memory The AVR 445 features an advanced memory system that enables you to establish different configurations тот, Бра Teocoli SL841.401.01 О_О the component video assignment, digital input and surround mode and other settings for each input source.
This flexibility enables you to customize the way in which you listen to each source and have the AVR 445 memorize those settings.
Once these settings are made, they will automatically be recalled whenever you select that input.
To simplify initial configuration and operation, the AVR 445 has been preconfigured with input settings that are typical for home theater systems.
These settings are detailed in the worksheets in the Appendix.
Before adjusting the input settings, it is a good idea to compare your input connections to the defaults so that you may see where changes need to be made.
Before using the unit, you may want to change the settings for some inputs so that they are properly configured to reflect the use of digital or analog inputs, the type of video display and speakers installed, and the surround mode specifics of your home theater system.
Once made, the selection of an input will automatically recall those settings.
For that reason, the procedures described below must be repeated for each input source so that you have the opportunity to customize each source to your specific listening requirements.
However, once done, they need not be changed again unless your system components have changed.
This is helpful if you wish to associate a specific product brand name with the input, or to simply enter any name that will help you to remember which source is being selected.
Next, press and hold the Set Button pœfor a few seconds until a flashing box appears to the right of the colon.
Immediately release the Set Button pœ, as you are now ready to enter the device name.
When you press the ¤ Navigation Button D ©, the symbols and numbers will appear first, followed by a reverse list of the alphabet in lowercase letters.
Press the button either way until the first letter of the desired name appears.
Press the Set Button pœto enter the input name into the system memory and to proceed with the configuration process.
The audio input defaults are shown in the table in the Appendix.
In normal operation, when a digital audio stream is interrupted, the unit will automatically switch to the analog inputs associated with that source.
This is particularly useful with cable set-top boxes where the input is normally digital, but occasionally changes to analog.
When the cursor is at the VIDEO IN-PORT line, you are able to select an alternative to the default input setting for the video input associated with any source except HDMI 1 and HDMI 2.
For the Video 1 and Video 4 inputs, the factory default of AUTO will select either composite or S-video, depending on which has an active signal.
For the Video 2, Video 3 and DVD inputs, the AUTO setting will normally select the default component input, but if it is not in use, the system will revert to a composite or S-video output if either one is active.
Note that this setting is not available when the HDMI inputs are selected.
Each of the Component Video Inputs O is assigned to a default source, as shown in the table in the Appendix, but if you have connected your system differently than the factory settings, you may select any of the three inputs for any source except the HDMI inputs or the Tuner.
If you do not need to change these defaults, press the ¤ Navigation Button Dto go to the next setting.
When the desired component input has been selected, or component video has been disabled by selecting OFF, press the ¤ Navigation Button D © to go to the next setting.
At the VIDEO PROCESS line, you are able to select whether video format conversion is to be used with the input source being configured.
The default setting of V-CONVERSION will output the incoming video in one of the following ways, depending on the input source.
The signal will also be available at the record outputs.
The BYPASS setting will not apply any video conversion to the incoming video signal, but it will output it in one of the following ways, depending on the input source.
This lack of lip sync is not a fault of the sources; rather, it is a by-product of video signal processing.
In most cases, we recommend that the delay adjustment be made using the direct-access controls on the remote so that you may more accurately adjust the delay while viewing the on-screen image, following the instructions shown on page 30, but you may also make it here using the menu system.
As the amount of delay needed may vary from one source to another, we strongly recommend that you adjust it for each input.
Press the ¤ Navigation Buttons D ©until the cursor points to the VIDEO 4 line.
NOTE: Selection of the front-panel jacks as outputs will remain effective as long as the AVR 445 is on.
Once the unit is turned off, the jacks will revert to their normal use as inputs when the unit is turned on again.
The REC OUT line enables you to select the audio output at the analog record outputs for the input source being configured.
Audio Setup This menu allows you to configure the tone controls.
If you do not wish to change any of those settings at this time, proceed to the next menu screen.
To make configuration changes to those parameters, first посетить страницу источник certain that the MASTER MENU is on screen with the cursor pointing to the AUDIO SETUP line, and press the Set Button pœ.
The AUDIO SETUP menu Figure 4 will appear.
Since surround modes are a matter of personal taste, feel free to select any mode you wish — you may change it later.
However, to make it easier to establish the initial parameters for the AVR 445, we suggest Logic 7 Cinema or Music for most analog inputs.
Alternatively, the Logic 7 Music mode is a good choice for stereo-only source material.
See page 58 for information on surround modes.
For digital program material, the AVR will always examine the data stream and automatically select a Dolby Digital or DTS mode, as applicable.
Press the Set Button pœuntil the SURROUND SETUP menu Figure 5 is on the screen.
The AUDIO IN-PORT and AUDIO IN lines are for display only and may not be changed through the SURROUND SETUP menu.
The AUDIO IN-PORT displays the physical connection source for the current active input, and the AUDIO IN line shows the signal type present.
Note that an UNLOCK message in the AUDIO IN line indicates that a digital input has been selected for that source, but that no data stream is present.
To process incoming 44.
The SURR MODE and SURR SELECT lines are related, as they guide you to the choice of the surround mode that will be activated whenever the input being configured is selected.
At the SURR SELECT line, you are able to choose the specific mode to be used from within the major surround mode group.
The choice of modes is governed by the input type as some modes such as Dolby Digital or DTS-ES are not available for analog sourcesas well as by the speaker configuration, since some продолжить are only available when a full 7.
The full list of available modes is detailed in the surround mode chart on page 60.
Also, you may also use the settings in the SURROUND CONFIG menus to delete modes you do normally use from the available choices.
The DEFAULT SURR mode line is where you choose the mode that is activated when a digital source is selected.
LAST will activate the last-used mode for any digital source.
Before proceeding to the SURROUND CONFIG line, it is worth noting that the settings in the submenus attached to that line may require a considerable amount of time to complete.
Although they are useful in that they allow you to customize the list of surround modes that appear in normal use of the AVR, you may wish to bypass those settings at this time so that you may complete the configuration process.
The SURROUND CONFIG line is your gateway to a broad range of surround mode configurations.
To continue, press the Set Button pœto go to the main SURROUND CONFIG menu Figure 6.
The default setting is OFF, which chooses the native mode.
The remaining five items in this menu each take you to a submenu listing the individual surround modes available within the selected mode group.
This includes both the discrete Dolby Digital modes, which cannot be turned off, as well as other modes which may be applied as post-processing on the source and system speaker configuration.
This includes both the discrete Dolby Digital modes, which cannot be turned off, as well as other modes which may be applied as post-processing on the source and system speaker configuration.
This includes both the discrete DTS Digital mode, which cannot be turned off, as well as other modes which may be applied as postprocessing on the source and system speaker configuration.
This includes not only PCM sources from DVD or CD players, but also all two-channel analog sources that are in use, as they are converted to PCM within the AVR 445.
This includes not only 96kHz PCM sources from DVD or CD players, but also all two-channel analog sources when 96kHz is chosen in the ADC SAMPLING mode line in the SURROUND SETUP menu.
The final item on the SURROUND SETUP menu is the DOLBY SURR SETUP line.
When the on-screen cursor is at this line, press the Set Button pœto bring the DOLBY SURROUND menu Figure 7 up on the screen.
The lower settings spread the center channel sound more broadly into the left and right channels.
The NIGHT line adjusts the settings for the Night mode, which is only available when specially encoded Dolby Digital sources are being played.
The Night mode is a feature of Dolby Digital that uses special processing to preserve the dynamic range and full intelligibility of a movie soundtrack, while reducing the peak level.
This prevents abruptly loud transitions from disturbing others, without reducing the sonic impact of a digital source.
To adjust the Night mode setting, make certain that the cursor is on the NIGHT line of the DOLBY menu.
MID: When MID is shown, a mild compression will be applied.
MAX: When MAX is shown, a more severe compression algorithm will be applied.
We recommend that you select the MID setting as a starting point and change to the MAX setting later, if desired.
The end result is a system calibration profile that enables your new receiver to deliver the best https://luga-les.ru/100/videoregistrator-hp-f330s.html sound no matter what type of speakers you have or what the properties of your listening room are.
If you have a standard camera tripod, attach the extender rod to the tripod, and then screw the microphone to the top of the rod.
Place the tripod at your primary listening position, at least three feet from the nearest hard surface and adjust it so that microphone is at or above ear level.
Press the Set Button pœ to bring the new menu to the screen.
To choose this mode simply press the Set Button pœ, as the cursor is already pointing to AUTOMATIC EQ DESIGN when the menu appears on the screen.
Press the ¤ Navigation Button n©again so that the cursor is pointing to MANUAL EQ DESIGN and then press the Set Button pœ.
When the interim message screen appears to remind you to set the crossovers, make sure that the cursor is pointing to CONTINUE and press the Set Button pœagain since you have already set the crossovers.
The FAR FIELD MEASURE screen Figure 9 will appear with instructions to place the microphone, if you have not already done so.
This screen is also the place to set the master volume level.
As noted on the screen, use the Volume Control r˙to adjust the volume level to —35dB, as shown on the line that appears at the bottom of the menu when the volume is adjusted.
Press the Set Button pœwhen the volume is set to the proper level.
Do not talk while the test tones are circulating, and if possible, turn off any ventilation systems if the noise form the air flow is loud enough for you to hear.
больше информации this point, a series of test tones will circulate among all the speakers in your system.
When the tones stop, the system will pause for as long as a minute while the processor makes its calculations based on the results of the signal measurements.
NOTE: While these tests detect whether a speaker is connected to a particular output, they cannot determine whether the speaker is in the correct position.
For example, it can tell whether a speaker is connected to the Surround Right output, but it cannot tell whether the speaker is on the right or left side of your listening room.
For that reason, we strongly recommend that you try to listen carefully to make sure that the test tone circulates in a clockwise rotation, starting with the front left speaker, to the center, to the front right, and so on to the subwoofer.
When the test process stops, you will see a message indicating that the Far Field measurements are complete.
If there is an error, follow the instructions in Step 7a or Step 7b.
When the Far Field tests are complete, a message screen will appear to indicate whether the procedure was successful or not.
In most cases, there will not be any problems and you will see the message shown in Figure 11 on your screen.
Continue these instructions with Step 8.
If the measurements are not successful due to a missing or malfunctioning speaker, the FAR FIELD EQ ERROR message will appear as shown in Figure 12.
If the test results indicate that one, but not both of the speakers in any of these pairs is present, the menu will show NO next to the speaker position where the tests did not report back that a speaker is present.
Should this message appear, make note of the suspect speaker location, exit the menus and turn the receiver off.
In some cases, the system may not function properly, due to overly high output levels.
When this occurs, you will see the message shown in Figure 13.
If you see this message, verify that the microphone is in the correct position, and is not too close to any one speaker.
Then press the Set Button pœto go back to the MASTER MENU.
Figure 13 Step 8.
When the Far Field measurements are completed, the next step is to take three Near Field measurements, one at each front speaker position.
At the NEAR FIELD EQ SELECT menu Figure 14 that should be on your screen after completing the instructions in Step 6, press the Set Button pœ to start the near field measurements with the front left speaker.
F R S p e a k e r B A C K T O M A S T E R M E N U Figure 14 At the NEAR FIELD MESSAGE menu, you will see an instruction to place the microphone in a different position than the one used for the initial Far Field measurements.
This time, place the microphone close to the speaker to be measured, at a distance of about 2 feet.
The top of the microphone should be pointed toward the speaker, rather than pointing up as was done for the Far Field tests.
Press the Set Button pœto continue.
You will now see a WARNING message Свитер Nike crw flc tm club19 aj1466-010 sr to the one shown in Figure 10 except that it will contain an option to return to the NEAR FIELD EQ SELECT menu Figure 14 as well as the ability to return to the MASTER MENU.
If you are ready to proceed with the test, make certain that the microphone is properly pointed toward the speaker selected for calibration, at a distance of about 2 feet.
One short test signal will be sent to the speaker position being calibrated and after a slight pause from the system to calculate the test results, you will see either a NEAR FIELD COMPLETE message Figure 15 or a NEAR FIELD ERROR message Figure 16.
In most cases, the COMPLETE message will appear, in which case you should proceed to Step 11; if an ERROR message appears, go to Step 12.
If the test results were successful, the message shown in Figure 15 will appear.
To properly calibrate the system, you will need to run the Near Field tests for all three front channel speakers left, center and right.
After running the test for the front left speaker, make certain that the cursor is pointing toward BACK TO NEAR FIELD and press the Set Button pœ.
You will return to the NEAR FIELD EQ SELECT menu Figure 14where you should repeat Steps 8 through 11 until all three front speakers have been calibrated.
Press the ¤ Navigation Button n© to return to the MASTER MENU.
If a NEAR FIELD ERROR message appears, as shown in Figure 16, make certain that ссылка на подробности microphone is about 2 feet from the speaker being tested and that the top of the microphone unit is pointing toward the speaker.
You may also have to raise or lower the master volume to achieve accurate readings.
After checking these two items, as needed, make certain that the cursor is pointing to the BACK TO NEAR FIELD line and press the Set Button pœ.
This will return you to the NEAR FIELD EQ SELECT menu Figure 14 where you should repeat Steps 8 through 11, adjusting the mike placement and volume level as needed until the NEAR FIELD COMPLETE menu Figure 15 appears after the test tone stops.
The next few pages in this manual detail the procedure for manually entering system data, but unless you want to view the setting information and make an adjustment, you are now ready to enjoy the finest in home theater and music reproduction.
Go to page 34 for complete information on operating your AVR 445.
However, if you feel that your listening room or system components are best suited to manual entry of these settings, the AVR 445 also allows you to enter or trim any of these system parameters.
Once changed, this setting will remain until you change it again in this menu.
To adjust the tilt setting, make sure that the cursor is on the EZSET ADJUST line, and press the Set Button pœ.
Note on Manual Setup Menus: Each manual setup menu Speaker Size, Delay Adjust and Channel Adjust includes a line that reads EZSET SETTINGS.
When the default setting of OFF is shown, you are able to make any required adjustments that are available on that menu.
This will allow you to make changes to the settings on that menu.
Even if you are familiar with making these adjustments, it is strongly recommended that you read the following section of this manual.
Note, however, that once this is done, any manual adjustments made will be lost and must be reentered.
This is necessary to make any level output adjustments needed after the setting changes so that the new configuration will be properly integrated.
The information below details the settings available for each of the speaker configurations.
At each of the four speaker position lines, you have the option to set the speaker size and crossover.
If your speakers at any position are traditional full-range models capable of handling the full audio spectrum, select LARGE.
When the speakers at a particular position are smaller frequency-limited speakers that do not have the ability to properly reproduce low-frequency sounds, select SMALL.
This setting tells the system that no speakers are present at that position, allowing the AVR to select the correct surround modes that are compatible with the number of speakers installed.
When LARGE is selected for any channel, a fullrange signal will be sent to the speaker outputs for that channel.
When there are no speakers available at a specific position, select NONE.
When this option is chosen for the Center or Side Surround speakers, the sound that would normally be sent to these channels will be split between the front left and right speakers.
Note that when your system does not include Center or Surround speakers, the use of Dolby Virtual Speaker as a surround mode may provide a sound field that simulates the presence of these speakers.
See the appendix for more information on the Dolby Virtual Speaker mode.
Note that when NONE is selected for the Back Surround speakers, the 6.
When this is the case for your system, you may wish to take advantage of the availability of the unused amplifier channel pair to power a second set of speakers in another room.
See page 44 for more information on amplifier configuration.
LFE Low-Pass-Filter Setting The LFE LP FLT line selects the frequency setting below which sounds that may be available from a special low-frequency effects LFE track are sent to the subwoofer.
This option is only available when the unit is set to SURROUND OFF so that a pure analog audio path is Лоток кабельный листовой DKC UNM610 100 х 1000 х 6000 мм />Subwoofer Size The final setting on the SPEAKER SIZE menu enables you to change the setting for the subwoofer size.
Delay Settings Due to the https://luga-les.ru/100/samosval-romana-dmf-mk-088400.html distances between the listening position and each speaker position, the amount of time it takes for sound to reach your ears from each channel is different.
You may compensate for this difference through the use of the delay settings to adjust the timing for the speaker placement and acoustic conditions in your listening room or home theater.
Should you wish to manually adjust the channel delay times, follow the instructions shown below.
In addition to providing delaying adjustments for each individual speaker position, the AVR 445 allows you to adjust the delay for the combined output of all speakers as a group.
If your measurements are in feet, proceed to the next step; if your measurements are made in meters, press the ¤ Navigation Button n©until the on-screen cursor is at the UNIT line on the menu.
The settings will reset, and you may now continue to make any needed changes, following the instructions shown below.
Once you make the first change to the default settings, the setting on the DELAY RESET line will return to OFF, indicating that the factory defaults are no longer in effect.
Note that only the speaker positions that have been set to LARGE or SMALL in the SPEAKER SETUP menu, as shown on page 30, may be adjusted.
The appearance of three dashes next to a speaker position in place of a distance setting indicates that you have not configured an active speaker for that location.
This will unlock the menu to allow changes.
The delay settings may also be adjusted at any time using the main remote control and while viewing an on-screen image by pressing the Delay Select Button Z.
Press the Set Button pagain to enter the setting.
When the name of the speaker position to be adjusted appears press the Set Button pwithin 5 seconds.
Output Level Adjustment Output level adjustment is a key part of the configuration of any surround sound product.
It is particularly important for a digital receiver such as the AVR 445, as correct outputs ensure that you hear soundtracks with the proper directionality and intensity.
However, you are able to use the CHANNEL ADJUST menu to trim the settings to suit your personal preferences or to configure the system so that the output settings are different from one input source to another.
The ability to make individual output level adjustments on a per-input basis is useful for listeners who may prefer different settings for the subwoofer or an individual channel group such as the front speakers when playing musical selections via the CD input as opposed to the movie soundtracks more frequently used with the DVD input.
IMPORTANT NOTE: Listeners are often confused about the operation of the surround channels.
While some assume that sound should always be coming from each speaker, most of the time there will be little or no sound in the surround channels.
This is because they are only used when a movie director or sound mixer specifically places sound there to create ambience, a special effect or to continue action from the front of the room to the rear.
When the output levels are properly set, it is normal for surround speakers to operate only occasionally.
Artificially increasing the volume to the rear speakers may destroy the illusion of an enveloping sound field that duplicates the way you hear sound in a movie theater or concert hall, even when making manual adjustments.
Before beginning the output level adjustment process, make certain that all speaker connections have been properly made.
The system volume should be set to the level that you will use during a typical listening session.
When the CHANNEL ADJUST menu first appears we recommend that you always run the test tone once the automatic mode to verify the speakers have been properly connected.
This will cause the test tone to circulate among all of the channels for five seconds at each position.
As the test tone circulates, the cursor will flash and move next to each position to indicate where the tone should be coming from.
If the tone is coming from a different speaker than the one indicated on the menu screen turn the AVR 445 off using the Main Power Switch Aand check the speaker wiring or connections to external power amplifiers to make certain that each speaker is connected to the correct output terminal.
When you have verified that all speakers are connected to the correct output terminal, turn the AVR 445 back on and return to this menu to resume the channel adjustment procedure.
After checking for speaker placement, let the test noise circulate again, and listen to see which channels sound louder than the others.
When you release the button, the circulation will resume after five seconds.
Continue to adjust the individual channels until the volume level sounds the same from each speaker.
If you are using a soundpressure level SPL meter for precise level adjustment, set the volume so that the meter reads 75dB, C-Weighting Slow.
When all channels have an equal volume level, the adjustment is complete.
In addition to having the test tone circulate automatically, you may also turn the test tone on, but advance it from one channel to the next manually.
This allows you to make calibration adjustments, but to have more control over the way the test tone is moved among the channels.
When you have circulated through all channels the test tone will stop, but you may restart it by returning to the TEST TONE line again and activating manual sequencing.
The final option for output level adjustment using the menu system does not use the internal test tone at all.
The output levels may also be adjusted at any time using the remote control and semi-OSD system.
To adjust the output levels in this fashion, press the Test Button f.
As soon as the button is pressed, the test tone will begin to circulate as indicated earlier.
Once the buttons are released, the test noise will begin to circulate again in five seconds.
When all channels have the same output level, press the Test Button fagain to complete the process.
NOTE: Output level adjustment with the test tone is not available in the Surround Off modes.
The last setting in this menu enables you to have the output levels remain the same for all inputs or to be adjusted differently for each or any input.
While most listeners prefer to keep the same output levels for all sources, you may wish to raise or lower some channels, particularly the subwoofer output for a specific source such as a CD that is primarily used for music playback.
Next, return to the CHANNEL ADJUST submenu using the steps outlined above.
When this setting is active you may change the channel output levels for any input without changing the settings previously established for another.
NOTE: With the default GLOBAL setting, output levels are associated with the various surround modes.
As you spend time listening to various materials and selecting a variety of surround modes, you may wish to revisit the CHANNEL ADJUST menu to set the output levels.
In most cases, only the digital input and surround mode will be different from one input to the next, while the speaker type, crossover frequency, Night mode and output level settings will usually be the same and may be quickly entered by entering the same data used for the original input.
Once the settings outlined on the previous pages have been made, the AVR 445 is ready for operation.
While there are some additional settings to be made, these are best done after you have had an opportunity to listen to a variety of sources and different kinds of pro- gram material.
These advanced settings are described on pages 42 and 43 of this manual.
In addition, any of the settings made in the initial configuration of the unit may be changed at any time.
As you add new or different sources or speakers, or if you wish to change a setting to better reflect your listening taste, simply follow the instructions for changing the settings for that parameter as shown in this section.
Having completed the setup and configuration process for your AVR 445, you are about to experience the finest in music and home theater listening.
Basic Operation Once you have completed the initial setup and configuration, the AVR 445 is simple to operate and enjoy.
The first press of any button will turn the unit on and select the input name printed on the button.
A second press of the button will select the input name printed above the button.
The first press of the button selects the frequency band and station or XM channel that was last tuned.
Press the button again to select between FM, AM and XM.
Whenever the AVR is turned on, you will see all of the front-panel indicators light up DGP OIL FOR NAILS and CUTICLE Масло для ногтей и кутикулы Авокадо 75мл a few seconds.
Each press of the button will decrease the time before the AVR shuts down in the following sequence.
Once you have set the desired Sleep Time, the frontpanel display will automatically dim to half-brightness.
The display will return to full-brightness when any button on the front panel or a remote is pressed, and then return again to half-brightness.
To читать больше the time remaining until the unit shuts down, press the Sleep Button Sonce.
To cancel the Sleep function, press the Sleep Button Sas many times as needed until the words SLEEP OFF appear in the Lower Display Line D.
When you will be away from home for an extended period of time, it is always a good idea to completely turn the unit off with the front-panel Main Power Switch A.
NOTE: All preset memories are lost if the unit is left turned off by using the Main Power Switch Afor more than four weeks.
Each press of the button will move the input selection through the list of available choices.
If the button is pressed when the AVR is in the Standby mode, the first press of the button will turn the unit on and select the last used input.
The first press will select the last tuned frequency band and station.
Each subsequent press will change the band to the last tuned station or XM preset.
Remember that the Input Selector Buttons labeled DVD, DMP, XM or HDMI are dual-input selectors.
A second press of the button will select the input name printed above the button.
The first press of the button selects the frequency band and station or XM channel that was last tuned.
Press the button again to select between FM, AM and Всё Интегральный усилитель Denon HEOS Amp HS2 сказал />When selecting the Tuner as the input, each press of the Tuner Selector Éscrolls through the choice of FM, AM or XM Radio when an optional XM Ready module is installed and the XM service has been activated.
REMINDER: When using any of the Input Selectors to change a source, you must press the AVR Selector 4 çto control AVR functions other than volume or source selection.
The input name will also appear in the Upper Display Line and in the front-panel Input Indicators!.
This permits simultaneous viewing and listening to different sources.
This input passes the input from the source directly through to the volume control without any analog-to-digital conversion, and it mutes the unused input jacks to prevent unwanted noise from interfering with system performance.
When this input is in use, the analog source is converted to digital so that you may use the same bass-management options for the direct input as are used for all other inputs.
This input also mutes the unused input jacks to prevent unwanted noise from interfering with system performance.
This input passes the input from the source directly through to the volume control without any analog- to-digital conversion.
When this input is in use, the analog source is converted to digital so that you may use the same bass-management options for the direct input as are used for all other inputs.
This will interrupt the output to all speakers and the headphone jack, but it will not affect any recording or dubbing that may be in progress.
When the system is muted, the word MUTE will flash in the on-screen display except when HDMI, 720p or 1080i sources are in use and in the Upper Display Line ; press the Mute Buttons i ßagain to return to normal operation.
The system default is TONE IN, which indicates that the bass and treble controls are active.
The unit will return to normal operation within five seconds after the setting is changed.
The speakers will automatically mute and a two-channel stereo signal will be sent to the headphones.
To listen through the headphones using the Dolby Headphone mode, simply press the buttons on the remote or front panel as shown below for changing a Dolby mode.
DOLBY H: DH will appear in the Lower Display Line when the Dolby Headphone mode is in use.
Surround Mode Https://luga-les.ru/100/vinos-rulya-kls-almen-70-35-mm.html One of the most important features of the AVR 445 is its ability to reproduce a full multichannel surround sound field from digital sources, analog matrix surround-encoded programs and standard stereo programs.
Selection a surround mode is based on personal taste, as well as the type of program source material being used.
For example, motion pictures or TV programs bearing the logo of one of the major surroundencoding processes, such as Dolby Surround or DTS Stereo may be played in either the Dolby Digital, Dolby Pro Logic II Cinema, DTS Neo:6 Cinema, or Logic 7 Cinema surround modes, depending on the source material.
NOTE: Once a program has been encoded with matrix surround information, it retains the surround information as long as the program is broadcast in stereo.
Thus, movies with surround sound may be decoded via any of the analog surround modes e.
In addition, a growing number of made-for-TV programs, sports broadcasts, radio dramas and music CDs are also produced in surround sound.
You may view a list of these programs at the Dolby Laboratories Web site at www.
Even when a program is not listed as carrying intentional surround information, you may find that the Dolby Pro Logic II, Dolby Pro Logic IIx, Logic 7 or DTS Neo:6, and the Hall or Theater modes often deliver enveloping surround presentations through the use of the natural information present in all stereo recordings.
Surround modes may be changed at any time by using either the front panel or remote control.
To select a new surround mode from the front panel, first press the Surround Кроссовки Ricosta Group Selector Button 2until the desired major surround mode group such as Dolby, DTS or Logic 7 is selected.
узнать больше, press the Surround Mode Selector Button 3to choose the specific individual surround mode.
To choose a surround mode using the remote, first press the button for the major surround mode group that includes the desired mode.
These buttons are the Dolby Mode Select g, the DTS Digital Model Select f, the DTS Neo:6 Mode Select e, the DSP Surround Mode Select 6and the Stereo Mode Select dbuttons.
The first press a button will show the current mode from that group if it is already in use, or the first available https://luga-les.ru/100/mashinka-drift-car-116.html if you are currently using another mode.
The Dolby Digital, Dolby Digital EX, DTS 5.
In addition, when a digital source is present, the AVR 445 will automatically select and switch to the correct mode, regardless of the mode that has been previously selected.
For more information on selecting digital sources, see the Digital Audio Playback section below.
Digital Audio Playback Digital audio is a major advancement over older analog surround processing systems.
It delivers up to six discrete channels, and each channel reproduces a full-fre- quency range 20Hz to 20kHz and offers dramatically improved dynamic range and significant improvements to signal-to-noise ratios.
In addition, digital systems have the capability to deliver an additional channel that is specifically devoted to low-frequency information.
When a digital soundtrack is playing, the number of channels available will vary according to the way in which the program was recorded.
Although most movies recorded with digital sound have 5.
When the program source is a broadcast, cable or satellite delivered digital program, only one type of soundtrack may be delivered at a time, while optical sources such as DVD may provide https://luga-les.ru/100/zanussi-pilesbornik-za120.html than one audio option.
With the AVR 445 you are able to not only play back the original compatible digital format, but using the processing power of the Texas Instruments DSP processor, it is possible to decode the basic digital track for 2.
Dolby Digital Dolby Digital is the default format for DVD discs and for the ATSC high-definition system used in the United States and Canada.
It is also used by the digital satellite program services and is available on most digital cable set-top boxes.
When the AVR 445 is connected to a blue-laser-based high-definition optical disc player via a coaxial or optical digital audio connection, the soundtrack may be available in the standard Dolby Digital or DTS format so that it may be decoded by the AVR.
An optional, external RF demodulator is required to use the AVR 445 to listen to the Dolby Digital soundtracks available on laser discs.
Connect the RF output of the LD player to the demodulator and then connect the digital output of the demodulator to the Optical or Coaxial Inputs KLab of the AVR 445.
A demodulator is not required for use with high-definition optical disc or DVD players, or with DTS-encoded laser discs.
For example, when a 5.
DTS DTS is another digital audio system that is capable of delivering 5.
Although both DTS and Dolby Digital are digital, they use different methods of encoding the signals, and thus they require different decoding circuits to convert the digital signals back to analog.
DTS-encoded soundtracks are available on select DVD and LD discs, as well as on special audio-only DTS discs.
You may use any LD or CD player equipped with a digital output to play DTS-encoded discs with читать далее AVR 445.
Early DVD players may not be able to play DTS-encoded DVDs.
When the AVR 445 is connected to a blue-laser- based high-definition optical disc player via an HDMI, coaxial or optical digital connection, the soundtrack from the player is also available in the standard DTS format so that it may be decoded by the AVR.
Before playing DVDs with a DTS soundtrack, make certain that the settings in your DVD player have been properly adjusted so that DTS audio is passed through.
You may change the settings in this list at any time by following the instructions on pages 24—25.
Selecting a Digital Source To utilize either digital mode, you must have properly connected a https://luga-les.ru/100/avtomati-promishlennogo-primeneniya-schneider-electric-3p3t-avt-vikl-ezc100-75ka400v-60-a-ezc100b3.html source to the AVR 445.
Connect the digital outputs from DVD players, HDTV receivers, satellite systems or CD players to the Optical or Coaxial Inputs KLab.
In order to provide a backup signal and a source for analog stereo recording, the analog outputs provided on digital source equipment should also be connected to their appropriate inputs on the AVR 445 rear panel e.
If you have not already configured an input for a digital source using the on-screen menus, as shown on page 22, first select the input using the remote or front-panel controls, as outlined in this manual.
When the digital source is playing, the AVR 445 will automatically detect which type of digital data stream is being decoded and display that information in the Upper Display Line.
When both a Вам Пакет Дой-пак бумажный 150х240+(40+40) с ЗИП замком и прозрачным окном думаю and an analog connection are made between a source device and the AVR, the digital input is the default.
If the digital stream is not present or is interrupted, the unit will automatically switch over to the analog inputs for the selected source.
Digital Bitstream and Surround Mode Indications When a digital source is playing, the AVR 445 senses the type of bitstream data that продолжить present, and automatically selects the proper surround mode.
For example, DTS bitstreams will cause the unit to switch to DTS decoding, and Dolby Digital bitstreams will enable Dolby Digital decoding.
When the unit senses PCM data from CDs or LDs, you may select any of the standard Dolby or DTS surround modes or Logic 7.
Since the range of available surround modes is dependent on the type of digital data that is present, the AVR 445 shows you what type of signal is present to help you understand the choice of modes.
When a digital source is first detected, the AVR 445 will display a message to indicate the type of bitstream being received.
The first number in the display message indicates how many discrete front-channel signals are present.
This will be displayed for Dolby Digital 5.
This will be displayed for Dolby Digital bitstreams that have stereo program material.
The middle number in the display message indicates how many discrete surround channel signals are present.
This is available only on discs with DTS-ES digital audio.
This will be displayed for Dolby Digital 5.
This will appear for Dolby Digital bitstreams that have matrix encoding.
This will be displayed for two-channel stereo programs.
The last number indicates whether there is a discrete low-frequency effects LFE channel.
This will be displayed for Dolby Digital and DTS programs, as available.
However, even when there is no dedicated LFE channel, low-frequency sound will be present at the subwoofer output when the speaker configuration is set to show the presence of a subwoofer.
This will be shown as EX-ON or EX-OFF for Dolby Digital bitstreams and ES-ON or ES-OFF for DTS bitstreams.
Note, however, that the availability of specific modes for postprocessing is dependent on the format of the incoming source material.
While some combinations e.
If you wish to add surround back channels to a 2.
It is always a good idea to check the readout for the channel data to make certain that it matches the audio logo information shown on the back of a DVD package.
When this happens, check the audio output settings for your DVD player or the audio menu selections for the specific disc being played to make certain that the player is sending the correct signal to the AVR.
In some cases, this may cause configuration problems when the video display is not capable of handling multichannel audio.
In those cases, it will send a signal back to the source such as a DVD player or set-top boxlimiting the digital audio output to two channels, even though a separate digital audio connection is made to the AVR.
For information about the specific setting on your source player, consult the manufacturer.
This is not a problem with the AVR 445, but rather it is a by-product of HDMI and its associated content protection systems.
PCM Playback PCM is the abbreviation for Pulse Code Modulation, the digital signal format used for standard CD playback, and other non-Dolby Digital and Накопительный электрический водонагреватель Ballu BWH/S 100 Smart WiFi digital sources such as MiniDisc.
In most cases, this will be PCM 44.
Note that the sampling rate displayed is that of the incoming digital signal, and not the upsampled rate that may be applied to PCM sources when Dolby Pro Logic or Dolby Wake Up!

Sandra Hey!

AV-ресивер Harman/Kardon AVR 445

Boynton Logic II processing is applied, as shown on page 24.
You may use an optional cable available at most electronics and computer stores for this purpose.
In addition, you will need to have a media player installed on the computer.
The AVR 445 has been tested for operation with Windows Media ® Player Version 8.
® In most cases, it is best to always make certain that you have the latest version of the player installed to ensure the best compatibility.
When the connection between a computer and the AVR is made for the first time, or if the USB connection is plugged into a different USB port on a computer or hub that has not been previously connected to the AVR, you will see a series of pop-up messages from Windows to indicate that the computer is configuring itself for the new device.
Before selecting the USB input, first make certain that one of the media players listed above has been opened on the computer.
The USB Input Source Indicator!
Activity of the Transport buttons may vary from one media player to another, but at the very least you will be able to use the Play and Stop buttons.
Once playback is started, the audio from a USB source is treated the same as any other two-channel audio source, and you may apply any of the appropriate surround processing modes.
When playing back audio from a computer via the USB connection, the internal speakers in a laptop computer are often muted.
L Figure 22 The letters inside the boxes tell you which channels are receiving an input signal.
When a digital source is in use, you will see letters displayed that correspond to the number of channels in the incoming data stream, which may be just the L and R for two-chan- nel PCM or 2.
When playing a DVD, always be certain to check the type of material on the disc.
Most discs show this на этой странице in the form of a listing or icon on the back of the disc jacket.
In some cases, the previews of special material will only be recorded in 2.
The AVR 445 will automatically sense changes to the bitstream and channel count and reflect them in these indicators.
This will happen when a digital input source is selected before the playback starts, or when a digital source such as a DVD is paused.
The flashing indicators remind you that the playback has stopped due to the absence of a digital signal and not through any fault of the AVR 445.
This is normal, and the digital playback will resume once the playback is started again.
The boxes around the channel indication letters are used to show which speakers are configured in your system.
Note that in some cases, such as an analog stereo or 2.
In other cases you may see letters with no speaker boxes.
This indicates that there is a discrete signal for that вот ссылка, but due to the mode in use e.
This prevents abruptly loud transitions from disturbing others, without reducing the impact of the digital source.
The Night mode is available only when Dolby Digital signals with special data are being played.
The Night mode may be engaged at any time when a Dolby Digital source is playing by pressing the Night Mode Button T.
Each press of the button will change the Night mode setting, as shown in the lower third of the on-screen display except when HDMI, 720p or 1080i sources are in use.
To turn the Night mode off, press the button as described, until D-RANGE OFF is shown.
The Night mode may also be selected to always be on at either level of compression using the options in the DOLBY SURROUND menu.
See page 25 for information on using the menus to set this option.
For example, even if you select a DTS mode for the movie, you may see Dolby Digital in use when the trailers, menus or copyright warnings are playing.
This is not a fault with either the AVR or your DVD player, as both are responding to the way the disc was created.
For example, while a sports event may have 5.
In addition, not all local stations are currently equipped for carrying the 5.
This may mean that even though the actual program is produced with 5.
Your AVR will automatically change to react to the proper type of audio stream if it is changed by the broadcast station.
Consult the program guide that accompanies the DVD or laser disc to determine which type of audio has been recorded on the disc.
The AVR 445 will automatically sense the type of digital surround encoding used and adjust to accommodate it.
The digital signals will be passed through to the Digital Audio Outputs XY.
When The Bridge is connected to the AVR and an iPod properly docked, здесь may use either remote to control the iPod for audio playback while using the front-panel display and on-screen semi-OSD messages to help you locate tracks or view information about the track being played.
You may even have the AVR 445 automatically turn on with your iPod as a playback source whenever the iPod is turned on, by using the DMP AUTO POWER menu option, described on page 43.
If the Lower Display Line D shows an UNPLUGGED… message, please check to see that the correct iPod adapter is used in The Bridge and that the iPod is на этой странице seated.
Press the Tuning Mode Button 7 to play or pause the current track.
The Tuning Selector 3 may be used to search in reverse left side of button or forward right side of button through the tracks.
Press the Preset Station Selectors 5 to scroll and the Set Button Ito select.
For complete information on using the remote or front-panel controls to operate an iPod, see the instructions that are included with The Bridge.
Stations may be tuned manually, or they may be stored as favorite station presets and recalled from a 30-position memory.
To change stations within a frequency band, press the Tuning Selection 3.
The first press will select the last used frequency band and station.
Subsequent presses will change the frequency bands, selecting the last used station or XM program used.
Press the Tuning Selection 3 to change stations within a frequency band.
The first press of the button selects the frequency band and station or XM channel that was last tuned.
Press the button again to select between FM, AM and XM.
An AUTO ST TUNED indication will momentarily appear when the station stops at a stereo FM station, and an AUTO TUNED indication will momentarily appear when an AM or monaural FM station is tuned.
Press the Tuning buttons again to scan to the next receivable station.
Next, press the Direct Button 8 µ.
Within 5 seconds of when DIRECT IN scrolls in the Upper Display Lineenter the station детальнее на этой странице by pressing the Numeric Keys kΔ.
If you press an incorrect button while entering a direct frequency, press the Clear Button 9 ¬to start over.
To enter a station into the memory, first tune the station using the steps outlined above.
Once entered, the preset number will appear in the Upper Display Line.
Repeat the process after tuning any additional stations to be preset.
XM Radio Operation XM Radio is a satellite-delivered service that offers hundreds of program channels, as well as local traffic and weather information for select cities.
Once you have purchased the XM module, follow the instructions accompanying it to activate the XM Service.
Connect the plug on the XM module to the XM Ready Input V on the rear panel of the AVR 445.
For best results, point the antenna module out a window, again, following the instructions packed with the XM product.
If a window view is not available for the antenna, XM Radio operates a series of terrestrial repeater stations that may be able to provide reception, though this service is not available everywhere.
IMPORTANT NOTE: XM Radio requires both the optional, external antenna module and a subscription to the XM Radio service.
Antenna and service sold separately; XM Radio is not available in Alaska or Hawaii.
If XM was the last-used tuner source, it will appear; or press the button again until XM Radio is heard.
Press the Tuning Selector 3 to change stations within a frequency band.
Press the Tuning Selector 3 to select a different XM channel.
These bars not shown in the semi-OSD messageshow the current signal strength similar to the signal strength displays on a cellular phone.
For local traffic information, the name of a city will be shown in place of the channel name.
You may change this display to show the current artist and track title information by pressing the Tuning Mode Selector 7B ø.
To store a channel into a memory group, first press the Set Button F œuntil PRESET SEARCH appears in the Upper Display Line C and on the top line of the semi-OSD display.
Next, press the Memory Button b ñand note that прощения, Запорная арматура Dinarm Machaon BFV-03/W (ДУ-125) 380В так dash will start to flash next to the preset memory bank letter.
Within five seconds, press the Numeric Button c from 1 to 8 for the memory slot you wish to use.
Press the Set Button F Iœagain to start the search for the next channel in that category.
If the message continues to appear, check to see whether the XM antenna is properly positioned toward a south-facing window, experiment with the antenna position, or change to another input and then reselect XM Radio.
Recording In normal operation, the audio or video source selected for listening through the AVR 445 is sent to the record outputs.
This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for Tape Outputs £ or Video 1 Audio and Video Outputs Sgin the record mode.
When a digital audio recorder is connected to the Digital Audio Outputs XY, you are able to record the digital signal using a CD-R, MiniDisc or other digital recording system.
In addition, the digital recorder must be compatible with the output signal.
For example, the PCM digital input from a CD player may be recorded on a CD-R or MiniDisc, but Dolby Digital or DTS signals may not.
Unauthorized duplication of copyrighted materials is prohibited by federal Gaskell Elizabeth Cleghorn Cousin Phillis />Once changed to an output, the setting will remain as long as the AVR is turned on, unless the setting is changed in the OSD menu system.
However, once the AVR 445 is turned off, the setting is canceled.
When the unit is turned on again, the front-panel jacks will return to their normal default setting as inputs.
In some cases, however, it may be desirable to trim the output levels using program material such as a test disc, or a selection you are familiar with.
Additionally, the output level for the subwoofer can only be adjusted using this procedure.
To adjust the output levels using program material, first set the reference volume for the front left and front right channels using the Volume Control H ˙.
DO NOT use the volume control, as this will alter the reference setting.
Repeat the as needed until all channels requiring adjustment have been set.
When all adjustments have been made and no further adjustments are made for 5 seconds, the AVR 445 will return to normal operation.
The output levels may also be adjusted using the on-screen menu system to either the internal test tone or an external test disc by following the instructions shown on page 31.
Using this feature does not change the settings; it merely puts them in or out of the signal path.
Dim Function Since the AVR 445 will often be used when movies or other kinds of video programming are viewed under low-light conditions, you may wish to lower the brightness of the front-panel displays and indicators so that they do not distract from the video presentation.
You may dim the displays using the menu system, as shown on page 42, or you may control the brightness directly from the remote.
Simply press the Dim Button Wonce to dim the front panel to half the normal brightness level; press it again to turn the displays off.
The accent lighting for the Volume Control will remain at its normal level, rather than dim when the panel displays are at half-brightness.
Note that all changes to the front-panel brightness level are temporary; the displays will return to fullbrightness after the AVR is turned off and then on again.
To return the displays to full-brightness without turning the unit off, press Dim Button Was needed until the displays are on.
In addition to lowering the brightness of the displays or turning them off completely, you may wish to have them appear whenever a button on the remote or front panel is pushed, and then gradually fade out after a set time period.
You may do this by making the appropriate settings in the VFD FADE TIME OUT line of the ADVANCED SELECT menu, as shown on page 42.
Memory Backup This product is equipped with a memory backup system that preserves the system configuration information and tuner presets if the unit is accidentally unplugged or subjected to a power outage.
This memory will last for at least four weeks, after which time all information must be reentered.
While it is not necessary to use these features to operate the unit, they provide additional options that you may wish to use.
To change a setting from its factory default, you will use the ADVANCED menu.
When the ADVANCED menu Figure 23 appears, follow the instructions shown below to make any needed configuration adjustments.
As an additional option, you may also set the AVR so that the displays are on whenever a button is pressed on the front panel or remote, but then fade out after a set period of time.
When OFF is selected, there is no display fade-out.
Once this time is set and the unit returned to normal operation, the displays will remain on for the time period selected whenever a button is pressed on the front panel or remote.
Note that if the displays have been turned completely off using the Dim function, the Fade function not operate.
However, you may wish to occasionally lower the brightness of the display, or turn it off completely.
When FULL is highlighted, the display is at its normal brightness.
When HALF is highlighted, the display is at half the normal brightness level.
When OFF is highlighted, all of the front-panel indicators will go dark.
Once the desired brightness level is selected, it will remain in effect until it is changed again or until the unit is turned off.
However, you may prefer to always have the AVR 445 turn on at a specific setting, regardless of what was last in use when the unit was turned off.
This setting may NOT be made with the regular volume controls.
NOTE: Since the setting for the turn-on volume cannot be heard while the setting is being made, you may wish to determine the setting before making the adjustment.
To do this, listen to any source and adjust the volume to the desired level using the regular Volume Controls H ˙.
A typical volume level will appear as a number such as —25dB.
Unlike some of the other adjustments in this menu, the turn-on volume default will remain in effect until it is changed or turned off in this menu, even when the unit is turned off.
Semi-OSD Settings The semi-OSD system places one-line messages at the lower third of the video display screen whenever the Volume, Input Source, Surround Mode, Tuner Frequency or any of the configuration settings is changed except when HDMI, 720p or 1080i sources are in use.
The semi-OSD system is helpful in that it enables you to have feedback on any control changes or remote commands using the video перейти на страницу when it is difficult to view the front-panel displays.
However, you may also prefer to turn these displays off permanently.
You may also want to adjust the length of time the displays remain on the screen.
Both of those options are possible with the AVR 445.
The default setting is 5 seconds.
ADVANCED FEATURES Full-OSD Time-Out Adjustment The FULL OSD menu system is used to simplify the setup and adjustment of the AVR 445 by using a series of on-screen menus.
The factory default setting for these menus leaves them on the screen for 20 seconds after a period of inactivity before they disappear from the screen Time-Out.
Time-Out is a safety measure to prevent image retention of the menu text in your monitor or projector, which might happen if it were left on indefinitely.
However, some viewers may prefer a slightly longer or shorter period before the on-screen display disappears.
Unlike most of the other options in this menu, this is a permanent setting change, and the Time-Out entry will remain in effect until it is changed, even if the unit is turned off.
However, you may set the AVR so that whenever the iPod is turned on, the AVR will also turn on automatically and set The Bridge as the input.
The AVR 445 is fully equipped to operate as the control center for a complete multiroom system that is capable of sending one audio source to a second zone in the house while a separate source is listened to in the main room.
In addition to providing for control the selection of the remote source and its volume, the AVR 445 offers a comprehensive range of options for powering the speakers in the second zone.
Regardless of who does the work, please remember that local building codes may govern in-wall electrical work, including proper specification of any wiring used and the way in which it is connected.
You are responsible for making certain that all multiroom installation work is done properly and in compliance with all applicable codes and regulations.
For standard installations, follow the instructions shown on pages 18—19 for the connection of speaker wire and IR remote wiring to the AVR 445.
For installations where A-BUS modules are used, follow the instructions provided with the A-BUS remote modules or keypads.
Additional information will also be made available through the Harman Kardon Web site at www.
RS-232 Control The AVR 445 provides the capability for full bidirectional remote control from compatible computers or specialized remote control systems.
RS-232 programming requires specialized programming knowledge and for that reason we recommend that it only be done by qualified professionals.
For more information on using the RS-232 port for remote control, visit the Harman Kardon Web site at www.
Multiroom Setup Once the audio and IR link connections have been made, the AVR 445 needs to be configured for multiroom operation.
To change a setting from its factory default, use the MULTI-ROOM menu.
When the MULTI-ROOM menu Figure 24 appears, follow the instructions shown below to make any needed configuration adjustments.
In addition to direct selection of any active input source, you may also select the DSP DWNMIX mode, which outputs a two-channel down-mixed version of multichannel digital sources.
When the selection has been made, press the ¤ Navigation Button D © once so that the cursor is next to MR VOL.
DO NOT use the regular volume control knobs for this setting.
Surround Channel Amplifier Assignment The AVR 445 is equipped with seven full-power amplifier channels to allow for complete 7.
However, if your system is only configured for 5.
This enables you to use the multiroom capabilities of the AVR 445 without the cost of an additional, external power amplifier.
Infrared Output Selection The AVR 445 enables you to select which IR input will be used to feed the Full Carrier IR Output B.
The factory default setting is the IR signal that is fed to the Multiroom IR Input N, but you may select other options.
Multiroom Operation When operating the AVR 445 from a remote room where an IR sensor or A-BUS module has been installed and properly connected back to the AVR, you may either the main remote control, the ZR 10 or any remote programmed with standard Harman Kardon remote control codes.
Unlike many other products, на этой странице AVR 445 does not use different codes for main room and remote room operation.
To turn the multiroom system off from a remote room, press the Power Off Button å 1.
When the multiroom system is turned on, you may use the same buttons on either remote that would normally be used to control an AVR function such as volume, source selection, tuner control or the operation of an iPod docked to The Bridge.
To turn the system off from the remote room, press the Power Off Button 0 å.
NOTE: When XM Radio or the tuner is selected as the source for the remote zone, any change to the frequency or preset will also change https://luga-les.ru/100/sunduk-volshebnaya-sosna-cof-100.html station being listened to in the main room, if the tuner is in use there.
Similarly, if someone in the main room changes the station, the change will also have an impact on the remote room.
To turn the multiroom system on or off from the room where the AVR is located, press the Multiroom Button Q.
Press the Set Button Fagain to activate the command.
NOTE: The multiroom system will remain on even when the AVR is turned off in the main listening room where it is located.
When the Multiroom system is turned on, the input selected using the Multiroom menu will be fed to the Multiroom Audio Outputs 8 on the rear panel as well as the A-BUS Connector ¢.
The volume will be as set in the previous selection, although it may also be adjusted using an optional IR sensor and the ZR 10 remote in the remote location, or the A-BUS keypad, or on the optional audio power amplifier connected to the Multiroom Audio Outputs 8.
Although changes to the input source or remote room volume will normally be made using an IR sensor in the remote room that is connected to the AVR, it is also possible to change those settings from the main listening room.
This is useful for situations where some or all of the remote rooms do not have an IR sensor, or жмите take control over the remote room without actually being in that room.
To change the input source or volume in the remote zone from the room where the AVR is located, press the Multiroom Button Q.
Press the Set Button F one more time to activate the command.
The AVR 445 remote is factory-programmed for all functions needed to operate the unit.
In addition, it is also preprogrammed to operate most recent Harman Kardon DVD players and changers, CD players and changers, CD recorders and cassette decks.
The codes for other brand devices may be programmed into the AVR 445 remote its extensive library of remote codes or a head-to-head learning process for codes not in the internal library.
For more information visit www.
We recommend that you first try the preprogrammed code entry method.
If по этой ссылке procedure is not successful, then try the code-learning method.
Preprogrammed Code Entry The easiest way to program the remote for operation with a source device from another brand is to follow these steps: 1.
Turn on the power to the device you wish to program into the AVR remote.
This is important, as in a later step you will need to see whether the device turns off to determine whether the remote has been programmed for the proper remote codes.
Release the button when the Лебедка электрическая ZITREK KCD- 500/1000/380V канат 100 м light under the Set Button F appears.
Press the Set Button Fto begin the process of selecting a device and locating the proper remote codes.
SELECT A DEVICE will appear in the LCD Figure 27.
S E L E C T A D E V I C E T V Figure 27 NOTE: The codes for hard-drive recorder products DVR such as TiVo ® are programmed by selecting VCR as the device.
For satellite-based TiVo products, check under the brand name of the product.
The next menu screen on the remote Figure 29 will show the start of the list of available brands.
S E L E C T B R A N D R C A Figure 29 NOTE: If the brand name for the product you wish to program does not appear in the list, the codes may still be available, as some manufacturers share codes.
The instructions for Learning Commands are on page 47.
The next step is important, as it determines which codes will operate the source device or display.
After you press and release the number key, watch the device being programmed to see whether it turns off.
As shown in the instructions that will appear on the next menu screen Figure 31if your device has turned off, press the Set Button F, and then skip to Step 10.
If the unit does not turn off, proceed to the next step.
If the device still does not turn off after all choices have been tried, or if there is only one number key shown as available to try, the code for this specific device is not in the AVR remote library under ссылка на продолжение brand name.
If that is the case, press the Clear Button jto exit the manual programming mode.
After you press the Set Button F, the top line of the LCD will read SAVING… and then the word SAVED will flash по этому сообщению times in the center of the bottom line.
When the codes are saved, the remote will return to normal operation, and whenever you press the Input Selector Button dthat was just programmed, the codes for the new device will be used.
If no further buttons are pressed, the remote will revert back to the default setting for AVR commands.
For that reason, it is possible that even though the remote appears to be properly programmed, you may find that some buttons do not appear to issue the correct command.
If this is the case, repeat the procedure outlined above, but if more than one numeric key selection is suggested in Step 7, try a different number to see whether the remote operates correctly.
Although the AVR remote is preprogrammed with an extensive library of codes for many major brands, it is also possible that you may have attempted to program a product that is too new or too old, and thus not all of its commands will be in the code library.
You may fill in the codes for any button that does not operate properly by using the learning technique shown on this page.
To automatically search through the codes that are available for a specific device type e.
Turn on the power to the device you wish to program into the AVR remote.
This is important because in a later step you will need to see whether the device turns off to determine whether the remote has been programmed for the proper remote codes.
Release the button when the red light under the Set Button F appears.
Press the Set Button Fto begin the process of selecting a device and locating the proper remote codes.
SELECT A DEVICE will appear in the LCD Figure 27.
Your confirmation that the remote is sending out commands is the movement of a square block across the top line of the LCD screen while the bottom line reads PLEASE WAIT….
It will take a few seconds for the remote to send out the first group of commands, after which you will see a new display in the LCD screen, as shown in Figure 33.
If the device being programmed has turned off, skip to Step 9.
When it pauses, follow the instructions shown in Step 7.
Depending on how many codes are stored for a specific device type, you may have нажмите чтобы перейти repeat this process as many as 15 times.
Remember, if the device turns off, skip to Step 9.
When all the codes for the device being programmed have been tried, the instruction shown in Figure 34 will appear.
Press the Set Button Fas instructed to exit the programming process.
If the device being programmed does turn off after following the instructions in Step 7, you will need to verify the code set by pressing the Numeric Keys cin sequence, as instructed in Figure 33.
If it has, skip to Step 12.
When it does, skip to the next step.
Press the Clear Button jto exit the programming process.
When pressing one of the numeric keys in Step 10 or 11 causes the device being programmed to turn back on, follow the instructions shown in Figure 33 and press the Set Button Fwithin five seconds of the device turning on.
After you press the Set https://luga-les.ru/100/naduvnaya-lodka-omaks-hsm-420.html, the top line of the LCD will read SAVING… and then the word SAVED will flash four times in the center of the bottom line.
When the codes are saved, the remote will return to normal operation, and whenever you press the Input Selector Button dthat was just programmed, the codes for the new device will be used.
If no further buttons взято отсюда pressed, the remote will revert back to the default setting for AVR commands.
This unique capability allows you to configure the remote so that whenever one of these buttons is pressed, the remote will not only select the codes for that device for itself, but it will transmit a separately programmed remote code.
Before pressing any buttons on either remote, place them so that the IR transmitter on the remote from the device to be programmed is приведу ссылку the Infrared Lens jon the AVR remote.
The two remotes should be no more than an inch apart, and there should not be any direct sunlight or other bright light source near the remotes.
Learning Keys for an Entire Device Remote 1.
Release the button when the red light under the Set Button F appears.

Комментарии 7

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *